Safety Inspections: Garage doors operate under a massive amount of tension. It’s the tension that makes a garage door work properly, but this tension can also pose a threat when the garage door is out of order. To ensure that your garage remains a safe place, we provide an annual, 14-point safety inspection. This can pinpoint problem areas before they spiral out of control and help you prevent costlier repairs after something goes wrong.
My double garage doors would not open and close properly. We also needed a keypad installed. A snow storm was approaching and we needed the repairs asap. We called Sunday, you came Monday afternoon, replaced spring sets for both doors, installed keypad and we were set. Very professional, got a detailed inspection of both doors and was happy to receive honest appraisal of necessary repairs. Thanks to you we were able to prepare for the storm without worrying how to get the garage doors open to shovel the driveway. Will contact again to completely replace doors. Thanks again.
Install the vertical roller tracks first by wrapping the curved lip around the rollers. The top of these tracks should be approximately 8 in. below the top of the top section. Wait to install the upper tracks until this step is complete. Check the level of the top section to make sure the tops of the vertical roller tracks are level with each other. The bottom of the roller tracks should be at least 1/8 in. off the concrete floor. After leveling and mounting these tracks, install the upper roller (horizontal) tracks.

The power to your garage is out with the door shut, and you need to get your car out or you'll have to take a bus. You'll notice a cord—usually with a red handle—dangling down from the guide track that the opener uses to open and close the door. This is the manual override. Once pulled, it allows you to open and close the door with your own power in the form a little elbow grease.

Garage Door Service

×